Ni-7.3%Si-2.2%B合金快淬组织与深过冷快凝机制

 采用B_2O_3玻璃和纯循环过热净化相结合的方法去除液态金属中的异质晶核,使液态Ni-7.3％Si-2.2％B合金获得了330K的过冷度。对比分析了该合金在低温基板上的快淬薄片与大体积深过冷试样的微观组织。借助计算机和红外测温系统,快速采集了熔体的再辉过程。数据处理发现,在深过冷液态金属的整个再辉区间,温度的上升速率呈瞬态变化特征,再辉时间随初始过冷度的提高而减小。最后,由再辉曲线确定出深过冷液态金属再辉过程中的固相分数与时间以及凝固速度与瞬时过冷度的关系。     

局部应力应变法弯扭复合疲劳损伤准则

 <正> 关于弯扭复合疲劳强度问题的研究,以往都是建立在名义应力法的基础上而局部应力应变法是一种比名义应力法更好的疲劳寿命计算方法,尤其是对于解决中、低周疲劳寿命问题。因此,本文把局部应力应变法引入弯扭复合疲劳寿命计算中,建立一个基于局部应力应变法的弯扭复合疲劳损伤准则。     

Phasing with near rectilinear Halo orbits: Design and comparison

In the next future, space agencies are planning to return to the Moon. The objective is to assemble an orbiting space station, called Gateway, on a Near Rectilinear Halo Orbit around the Moon as a base for future Moon and deep space missions. Within this framework, multiple side missions will be planned to sustain the Gateway (Artemis mission). The proposed work is thought in framework of the preliminary design of future cargo missions, in particular on the design of an efficient phasing trajectory, under the Circular Restricted Three body problem hypotheses, to bring a cargo vehicle from the end of the Earth-Moon transfer to the beginning of the proximity operations such as rendezvous and docking with the space station. The work aims covering the lack of literature in phasing trajectories with the NRHO by proposing three different strategies to connect the Earth-Moon transfer trajectory with the proximity operations. The three strategies are classified based on the choice of the parking orbits or the choice of the manifolds. Two strategies use butterfly and Halo orbits to park the vehicle before transferring to the target orbit. The third strategy, instead, uses manifolds to allow a direct phasing. In the paper, the three innovative strategies are designed and compare in a specific scenario.     

Validity assessment of SAMOSA retracking for fully-focused SAR altimeter waveforms

We demonstrate in this work how we can take advantage of known unfocused SAR (UF-SAR) retracking methods (e.g. the physical SAMOSA model) for retracking of fully-focused SAR (FF-SAR) waveforms. Our insights are an important step towards consistent observations of sea surface height, significant wave height and backscatter coefficient (wind speed) with both UF-SAR and FF-SAR. This is of particular interest for SAR altimetry in the coastal zone, since coastal clutter may be filtered out more efficiently in the high-resolution FF-SAR waveform data, which has the potential to improve data quality. We implemented a multi-mission FF-SAR altimetry processor for Sentinel-3 (S3) and Sentinel-6 Michael Freilich (S6), using a back-projection algorithm, and analysed ocean waveform statistics compared to multilooked UF-SAR. We find for Sentinel-3 that the averaged power waveforms of UF-SAR and FF-SAR over ocean are virtually identical, while for Sentinel-6 the FF-SAR power waveforms better resemble the UF-SAR zero-Doppler beam. We can explain and model the similarities and differences in the data via theoretical considerations of the waveform integrals. These findings suggest to use the existing UF-SAR SAMOSA model for retracking S3 FF-SAR waveforms but the SAMOSA zero-Doppler beam model for S6 FF-SAR waveforms, instead. Testing the outlined approach over short track segments, we obtain range biases between UF-SAR and FF-SAR lower than 2 mm and significant wave height biases lower than 5 cm.     

Ionospheric electron density over Resolute Bay according to E-CHAIM model and RISR radar measurements

In this study, predictions of the E-CHAIM ionospheric model are compared with measurements by the incoherent scatter radars RISR at Resolute Bay, Canada, in the northern polar cap. Reasonable coverage was available for all seasons except winter for which no conclusions were drawn. It is shown that ratios of the model-to measured electron densities are close to unity in the central part of the F layer, around its peak. This is particularly evident for summer daytime. Distributions of the ratios are wider for other seasons indicating larger number of cases when the model underestimates or overestimates. E-CHAIM underestimates the electron density at ionospheric topside and bottomside by ～ 10–20 %. At the bottomside, the underestimations are strongest in summer and equinoctial nighttime. At the topside, the underestimations are strongest in autumn nighttime. Model overestimations are noticeable in the middle part of the F layer during dawn hours in autumn. Overall, the model tends to not predict highest-observed peak electron densities and the largest-observed heights of the peak.     

2021 Turkey mega forest Fires: Biodiversity measurements of the IUCN Red List wildlife mammals in Sentinel-2 based burned areas

Mega wildfires are one of the environmental disasters worldwide. This study evaluates the pre-fire species diversity and the indirect effects, including habitat loss for one of the largest wildfires in Manavgat (Antalya-Turkey) in 2021, with a two-step methodology. Here, (1) burnt areas in the Manavgat district (2021) were detected with remote sensing data from Sentinel-2A by delta Normalized Burn Ratio calculation for a selected area in Google Earth Engine, and (2) mammals' habitat vector data of International Union for Conservation of Nature (IUCN) Red List were integrated into Habitat and Biodiversity modelling of Terrset to analyze the alpha, beta, gamma diversity and Range Restriction Index for the wildfire region. In the total 4210 km² study area, 696 km² of the area was damaged by different fire severity; also, there were 56 mammal species' habitats here. These species include bats (i.e. Nyctalus leisleri), felids (i.e. Felis chaus), rodents (i.e. Rattus norvegicus) and large mammals (i.e. Ursus arctos). 88 % of these species are in IUCN's Least Concern category. The remaining classes are Near Threatened (3.7 %) and Vulnerable (7.4 %). This study also indicated that the burnt area's species richness does not totally consist of endemic species. Therefore, pre-fire species richness analyses of this study can be a base for further studies about the species' post-fire activity and occupancy.Furthermore, the 2021 mega wildfires show us the necessity of wildfire monitoring and risk studies in the entire Mediterranean ecosystem to evaluate the risks to the Sustainable Development Goals. Therefore, post-fire spatial data, fire migration monitorization, and recording of the species' activities should be performed temporally. In this way, the ability of wildlife's recovering, and the direct and indirect effects of the fire will be examined for ecosystems in the long term.     

基于RBF神经网络的结构光三维视觉检测方法

研究了基于RBF(Redial Basis Function)神经网络的结构光三维视觉检测方法.该方法利用RBF网络良好的非线性映射能力以及学习、泛化能力,通过所获取的高精度的样本数据来训练RBF网络,最终建立起了用于结构光三维视觉检测的RBF网络模型.与常规方法相比,该方法不需要考虑视觉模型误差、光学调整误差等因素对视觉检测系统测量精度的影响,因而能够有效的克服常规建模方法的不足,保证了检测系统具有较高的精度.     

飞翼布局作战飞机起降特性分析

飞翼布局作战飞机采取新型操纵面,且取消了常规的用于起降增升的襟翼装置,研究了该特殊构型飞机起降飞行的操纵新机理.以一种飞翼布局飞机为例,根据风洞试验的结果比较了典型的飞翼与常规布局作战飞机低速气动特性的差异;进而计算了其起降性能,并与典型常规布局作战飞机F-16进行了对比分析.结果表明,由于全翼面的布局设计,飞翼飞机具有翼载荷低的特点,使其更容易满足起降性能的要求.研究结果对飞翼布局作战飞机的设计和性能评估具有重要的参考价值.     

仿人眼功能的三维激光扫描算法

针对目前国内外应用于移动机器人的三维激光扫描系统存在的扫描效率问题,提出了一种仿人眼功能的三维激光扫描算法.从仿生学角度出发,该算法模仿人类眼睛的扫描功能,对陌生环境进行分步扫描:根据当前的扫描信息,在线规划出下一步的扫描规律,以减少无用信息的获取;采用分步插补定位的方法来弥补分步扫描带来的时间消耗,从而提高了扫描系统的效率.为了满足扫描算法的在线处理对实时性的要求,采用了一种DSP(Digital Signal Processing)+FPGA(Field-Programmable Gate Array)的硬件平台架构:即DSP作主控制器负责三维信息的获取,FPGA作协处理器负责扫描算法的实现.实验结果表明仿人眼功能的扫描算法可以有效的提高三维扫描系统的扫描效率.     

基于点线关系的透视图消隐算法

准确获取建筑物的三维形体信息,在军事和民用上都有非常重要的意义.针对建筑物三维形体获取过程中的消隐问题,提出了一种基于点线关系的三维透视图消隐算法.结合后向面判别法和光线投射算法,利用三维表面模型中点、线、面的遮挡关系和视平面域上的包含性规则,进行边界线段的显、隐程度检查,实现对模型的消隐处理.实验结果表明,该算法数据结构简单,建立的透视投影计算模型正确且消隐算法有效,为地形地物透视图的消隐提供了一种新的方法与支持手段.